Continuous Sealer
D 552 AVT
Installation
15
3.4 Adjusting the sealer
You can make the following adjustments:
•
Height of sealing unit in relation to the conveyor belt; to adjust the length of
the bags.
•
Horizontal distance between conveyor belt and sealing unit; to adjust the
position of the bags on the conveyor belt.
•
Height of conveyor belt in relation to the floor; to adjust the working height.
3.4.1 Adjusting the height of the sealing unit
The height of the sealing unit in relation to the conveyor belt is adjusted as
follows:
3.4.2 Adjusting the horizontal position of the conveyor belt
The horizontal distance of the conveyor belt in relation to the sealing unit is
adjusted as follows:
1. Set the height of the sealing unit by
rotating the crank.
The top of the bag to be sealed
should be able to move freely along
the top of the infeed guide.
1. Loosen the four locking bolts a number
of turns.
2. Adjust the position of the conveyor belt
in relation to the sealing unit by shifting
the conveyor belt.
The position of the conveyor belt is
to be adjusted in such a way that
the bag to be sealed is in the centre
of the conveyor belt as far as
possible.
3. Tighten the locking bolts again.
