Continuous Sealer
D 552 AVT
Maintenance
35
7.7 Adjusting the pressing force of the heating blocks
The heating blocks are adjusted as follows:
Turn to the left to increase the pressing force and to the right to
reduce it.
Note that the adjustment depends on the position (horizontal or
vertical) of the housing.
Adjust both nuts equally.
7.8 Adjusting the pressing force of the press rollers
The press rollers are adjusted as follows:
Turn to the left to increase the pressing force and to the right to
reduce it.
Note that the adjustment depends on the position (horizontal or
vertical) of the housing.
1. Turn the setting nut to adjust the
pressing force.
Try to keep the pressing force down
as far as possible so as to minimise
wear and tear on the PTFE belts.
If necessary, the pressure may be
increased for materials that are
difficult to seal. Always check
whether the bag is not blocked or
stuck during sealing.
1. Turn the setting nuts to adjust the
pressing force.
Try to keep the pressing force down
as far as possible so as to minimise
wear and tear on the PTFE belts.
If necessary, the pressure may be
increased for materials that are
difficult to seal. Always check
whether the bag is not blocked or
stuck during sealing.
