Troubleshooting
26
The cooling is not work-
ing.
The blower is not on.
Switch on the blower.
The cooling plates are
set too high.
Set the cooling plates
correctly.
Internal malfunction.
Contact your dealer or
Audion.
Error code E1
Frequency setting 50 Hz
or 60 Hz (PCB jumpers)
is incorrect.
Check the frequency of
the grid and set the PCB
jumpers correctly.
Error code E2
Loose wire in the tem-
perature sensor
(PT100).
Check the connection of
the wiring of the tem-
perature sensor
(PT100).
Error code E3
Short circuit in the tem-
perature sensor
(PT100).
Replace the tempera-
ture sensor (PT100).
The conveyor belt is not
running.
The speed is set to ’0’.
Readjust the speed to a
higher value.
Internal malfunction.
Contact your dealer or
Audion.
Problem
Cause
Solution
