Operation
24
5.4 Emergency stop
In case of an emergency, switch off the sealer completely as follows:
5.4.1 Restarting after an emergency stop
After an emergency stop, restart the sealer as follows:
5.5 Switching off the sealer completely
Switch off the sealer completely as follows:
1. Press the
EMERGENCY
STOP
BUTTON
.
In case of emergency situations,
always make use of the
EMERGENCY
STOP
BUTTON
immediately.
Do not use the
EMERGENCY
STOP
BUTTON
to switch off the sealer in
normal circumstances.
Make sure the cause of the fault/
malfunction has been removed
before restarting the sealer.
1. Turn the
EMERGENCY
STOP
BUTTON
clockwise to reset it.
2. Press the S
TART
/S
TOP
button.
The sealer is now ready for use
again. Possibly the Temp led will be
blinking; in that case, the sealer
has to heat up again first.
1. Set the
MAIN
SWITCH
to ’0’.
1
1
2
1
