- Programming -
54
C6. Now enter the first of the five blocked numbers using the number pad. Incorrect numbers
can be deleted with the
button.
Note:
Individual dialling codes can also be blocked.
C7. Confirm the blocked number with the
OK
button. The next blocked number will appear in
the display.
C8. Now enter the next blocked numbers and confirm in each case with
OK
. After the fifth
blocked number, the display will again show the message "P-Block Setting?". If you do
not want to make an entry for a blocked number, simply confirm the blank display with
OK
.
C9. You can exit programming with the
MENUE
button.
5.4 Call
waiting
The ISDN network provides you with the option of being called by a second subscriber while
you are making a call. During a call, the display and a call signal will draw your attention to the
second call. You can then either reject or accept this second call. The "Call waiting" function
can be activated or deactivated.
1. Press
the
MENUE
button.
2. Press
the button as many times as necessary until the message "SERVICE" appears
in the display.
3. Press
the
OK
button. The message "Pin Code >>" will appear in the display.
4. Now enter the five-digit PIN code using the keypad (factory setting 0 0 0 0 0) and confirm
the entry with
OK
. The message "MSN ?" will appear in the display.
5. Now press the
button as many times as necessary until the message "Call Waiting?"
appears in the display.
6. Confirm
with
the
OK
button. The message "CW" Enable?“ will appear in the display.
7. Now choose between the two options using the
and
buttons.
CW. Enable ? = The second call will be signalled in the display and with a tone. You
can reject or accept the second call.
CW. Disable ?
= The second caller will get the engaged tone and you will not be
informed of the second call.
8. Confirm
with
OK
and the selected language will be set.
9. You can exit programming with the
MENUE
button.
5.5 Changing the PIN code
