AudioControl Maestro M2e, Owner'S Enjoyment Manual

Page: 52 / 62

Phone 425-775-8461 • Fax 425-778-3166
®
52
tm
The OSD is pink/red

Verify that the HQ Video Mode is set to Component in
the Maestro M2e configuration settings. If this is set to
RGB, the on-screen display will be pink or red.
No On-Screen Display overlaid on video

The Maestro M2e cannot overlay the OSD onto video
signals that have a higher than normal scan rate such
as Progressive or HDTV. The Maestro M2e automatically
switches to Full Screen mode with black background
when receiving these video signals.
No Video On Active Balanced Outputs

Confirm that the RJ-45 connectors on the CAT-5 cable
areterminated properly. Using a cable tester is recom-
mended.

Confirm that you have selected the component output as
it parallels to the Active Balanced Output.
Audio
The audio doesn’t match the video

The Video and Audio input can be selected independently
in the Main Menu. Verify they are set the same.
 Verify the correct Video Input and Digital Audio input as-
signments are configured for the Source input button.
The sound is poor or distorted

Verify the speaker settings configuration matches your
speakers. If a speaker is set to Large and it cannot repro-
duce full range bass, you will hear distortion.

If the trouble is only on some channels: Verify the audio
RCA cables to the power amplifiers are working and seated
properly.

If the trouble is in all channels: Verify the Input Trim set-
ting in the Advanced Configurations is not set too low.
Troubleshooting