AudioControl Maestro M2e, Owner'S Enjoyment Manual

Page: 19 / 62

Phone 425-775-8461 • Fax 425-778-3166
®
19
tm
Multi-Channel Analog Audio
Audiophile surround recording formats such as SACD and
DVD-A decode the multi-channel signals directly within the
player. The Maestro M2e features an 8 channel direct ana-
log input for these sources. These inputs bypass the digital
circuitry in the Maestro M2e and are routed directly to the
Main Amplifier outputs via an independent volume control
circuit. This ensures the highest possible audio quality for
this input.
Video Connections
Choosing your video
There are four video signal connection formats ranging
from Composite (Good), S-Video (Better), HDMI digital
video, Active Balanced and Component (Best). Depending
on the particular source unit, you may have the option of
more than one of these video connections. Always choose
the highest quality video output available on your sources.
Because of the higher bandwidths involved with video
signals, the quality of the interconnect cables you choose is
important. Video connections should always be made with
cables specifically designed for video. Don’t be tempted to
grab some extra audio RCA cables laying around. Without
the proper 75 ohm cabling, your picture quality will suf-
fer from smear, ghosting or noise. It is always a good idea
to make certain that the video and audio signal cables are
routed away from any power wiring.
Component, Composite and S-Video
To ensure the highest quality video signal you always want
to run the best video format from each source unit to your
Maestro M2e. For example, if your DVD player has Com-
ponent and Composite video outputs, use the Component
connection. Should you wish to route the video to Zone 2
then you need to also run Composite connections.
Types of video connections
Set-Up & Configuration