Phone 425-775-8461 • Fax 425-778-3166
®
44
tm
Mute the audio output on the main zone: PC_.10 <cr>
Receiving Commands
Command processing begins when the first semicolon sepa-
rator line feed terminator is received. When a command is
executed properly, the Maestro M2e echoes the command
back in the following format:
<STR><RC><AC><Px><ETR>
Parameter Command
Description
STR
“AV_”
Begins transmission
RC
Reply code
AC “P” or “R”
Answer Code – “P”(command accepted),
“R”(command error)
P1
“1” or “2”
Zone – Determines which zone the
command controlled
P2
“1 – 9”
Represents individual functions based on
the above
Command Code (ie. On, Off, Mute, Source
Selection, Surround Modes)
ETR
Carriage Return End transmission
As an example:
Confirming Power up of the Maestro M2e:
AV_*P11 <cr>
Confirming Mute of the audio output on the main zone:
AV_.P10 <cr>
Manually Determining RS-232 Codes
When attempting to determine a specific command se-
quence for the Maestro M2e, it is sometime helpful to con-
nect the Maestro M2e to a terminal emulator program (like
Hyperterminal) and utilize the information from the Re-
ceiving Command. Physically perform the function on the
Maestro M2e (ie. adjust the volume knob, select a source,
change a surround effect), your Maestro M2e will transmit
a Receiving Command and you can use the command on
your screen to determine the specific RS-232 command.
Automation Integration
Summary of Contents for Maestro M2e
Page 2: ......
Page 14: ...Phone 425 775 8461 Fax 425 778 3166 14 tm Guided Tour of the MasestroM2 ...
Page 18: ...Phone 425 775 8461 Fax 425 778 3166 18 tm MaestroM2etm Set Up Configuration ...
Page 50: ...Phone 425 775 8461 Fax 425 778 3166 50 tm ...