AudioControl Maestro M2e, Owner'S Enjoyment Manual

Page: 51 / 62

Phone 425-775-8461 • Fax 425-778-3166
®
51
tm
Troubleshooting Common Problems
General
There are no lights on the Maestro M2e

Pressing any Source selection or the Standby button on
the front panel should wake the Maestro M2e.

Verify that the power cord is plugged into a live AC outlet.

Verify that the rear panel Power switch on the Maestro
M2e is pressed in (On).
The main front panel display is blank

Press the Display button. This button controls the display
brightness and also allows you to turn the display off
entirely.
The main zone changes while selecting sources from Zone 2

Change the Zone 1 Control option in the Zone 2 Con
figuration Menu to Off.
Video
No video/picture

Verify your video display or projector is turned on and set
to the correct input for the Maestro M2e. Press the Menu
button on the Maestro M2e and look for the Main Menu
to show on the video display.

Verify the correct input on the video display is selected
for the output of the source (i.e. Component Video if the
output of the DVD player is Component).

Verify the Video Input assignment configurations. Make
certain that the correct video input is assigned to the
source you are playing.
No Video on Zone 2

Verify the composite video input from source is
connected.
There is no On-Screen Display (OSD)

Verify the OSD is turned on in the Maestro M2e configu-
ration settings.

Verify that the correct input is selected on the video dis-
play or projector.
Troubleshooting