AudioControl DQ-61 User Manual Download

Page: 10 / 32

-----------------------------------------------

----------------------------------------------

6. Ground:

Connect to a good, verified chassis ground (the battery

comes to mind.)

Warning:

Factory ground wires typically have

multiple devices connected to them so it is not recommended to

use them.

7. +12V Power:

Connect to a good source of 12-volt power (the bat-

tery comes to mind)

8. Remote In:

In some unusual installations, you may not want to

use the GTO™ to turn on your system due to secondary functions

with factory installed source unit. For these cases the DQ-61 can

be turned on remotely with a +12-volt trigger.

9. Remote Out:

This outputs 12 volts with 1 amp of current when

the DQ-61 is powered up, so you can turn on external devices

like signal processors and amplifiers with this wire.

10. Maximized Indicator:

This brightly colored LED indicates when

the signal level coming into your DQ-61 is just below clipping.

When properly level matched, this LED should flicker occasionally

when your system is playing at its maximum volume level.

11. Power:

If you have connected all of your power wires correctly,

this LED should be bright red when your system turns on.

12. Remote Level Control ACR-3 (Included):

In the

Set-Up

mode this

control allows for setting the signal delays. In the

Normal

mode,

it gives control over the Subwoofer/Ch3 level output. Addition

ally, in the

Normal

mode, when you tap this switch it will bypass

the equalization, signal delay , and AccuBASS® processing of your

DQ-61 so you can compare the sound.

13. Pre-Amp Outputs:

These RCA plugs should be connected to the

next component after the DQ-61, such as a crossover or amplifi

er. Do not connect any speakers directly to your DQ-61. (Defi

nitely don’t connect to any home appliances, like your blender or

toaster.)

Summary of Contents for DQ-61

































Search results

Summary of Contents for DQ-61

Reviews:

Related manuals for DQ-61

Brands by name

Popular brands

AudioControl DQ-61, User Manual

Search results

Summary of Contents for DQ-61

Reviews:

Related manuals for DQ-61

Brands by name

Popular brands