-----------------------------------------------23 ----------------------------------------------
Remote Level Control - ACR-3
The ACR-3 is a multi-function remote that
used for making the initial signal delay
adjustments in the Set-Up mode and then
providing level control over the Channel
3/Subwoofer output in the Normal mode.
This allows you to balance the bass level
with the rest of the system and then increase or decrease as needed.
An additional feature of the ACR-3 dash remote is that it allows the sig
-
nal processing of the DQ-61 (equalization, signal delay, and AccuBASS®)
to be switched in and out of the audio circuit. That means that you can
hear the system with and without the processing and hear the differ
-
ence that the tuning makes in the sound of your system.
Placement and Mounting
The ACR-3 dash control may be mounted under the dash using its own
bracket or through a custom hole in the dash. It should be within reach
of the driver and in a spot where the LEDs are plainly visible. Discon
-
nect the vehicle b12V and Ground connections before instal
-
lation. The dash control mounts with two screws, which attach to the
underside of the dashboard. Slide under the dash and place the dash
control in its mounting position, mark the two best mounting holes,
carefully drill pilot holes without damaging any under-dash wiring, and
secure with two screws.
Summary of Contents for DQ-61
Page 8: ... 8 3 2 4 5 12 15 14 10 11 9 8 7 6 1 13 ...
Page 25: ... 25 ...
