AudioControl DQ-61 User Manual Download

Page: 2 / 32

----------------------------------------------- 2 -----------------------------------------------

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manu-

facturer’s instructions.

Do not install near any heat sources such as mufflers, silencers, exhaust

pipes, or other apparatus (including amplifiers) that produce heat.

WARNING:

Improper installation may lead to permanent injury or death.

Installation of the apparatus must be done with great care by qualified per-

sonnel, to prevent damage to fuel lines, power, and other electrical wiring,

hydraulic brake lines, and other systems, that might compromise vehicle

safety.

10. P12V and Ground wiring of a suitable thickness/gauge to ensure

adequate current to the apparatus.

11. Use rubber grommets to protect wiring whenever passing wires through

metal openings or bulkheads.

12. Only use attachments/accessories specified by the manufacturer.
13. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as the power input ter-

minals are damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

14. This apparatus shall not be exposed to dripping or splashing, and no object

filled with liquids, shall be placed on the apparatus.

15. Fuses shall be replaced only with the correct type and fuse value, and only

when the apparatus is powered off.

16. Exposure to high sound pressure levels may lead to permanent hearing

loss. Take every precaution to protect your hearing.

Summary of Contents for DQ-61

































Search results

Summary of Contents for DQ-61

Reviews:

Related manuals for DQ-61

Brands by name

Popular brands

AudioControl DQ-61, User Manual

Search results

Summary of Contents for DQ-61

Reviews:

Related manuals for DQ-61

Brands by name

Popular brands