AudioControl DQ-61 User Manual Download

Page: 5 / 32

----------------------------------------------- 5 -----------------------------------------------

Quick Installation Information

If you are a seasoned audio enthusiast and are chomping at the bit

to begin your experience with the DQ-61, we offer some Quick Install

Guidelines below to help maximize your experience. Please also refer

to the system diagrams on page 14, 15, and 16.

Physically mount the DQ-61 in a location that keeps it away from

beverage spills, food crumbs, and the curious fingers of carnival

folk. You will want to select a location that allows you access to

the top panel controls. In many cases you can find factory speak

er leads in the rear of the vehicle or at the factory amplifier that

are easy to access.

The DQ-61 needs to be installed in the signal path between your

OEM source unit (or factory amplifier) and an after-market ampli

fier and/or processor(s).

Do not

connect the DQ-61 between the

factory head unit and the factory amplifier. Locate the amplified

speaker wires that are coming from your factory source unit and/

or amplifier and connect them to the speaker-level inputs on

your DQ-61.

Note:

If your source unit has front, rear, and subwoofer

speaker-level outputs, connect them to the three sets of inputs

on your DQ-61. If the source unit only has front and rear outputs,

the Auto Mode circuitry in your DQ-61 automatically routes the

Channel 2 input channels to the (Channel 3) subwoofer channels.

Use RCA connecting cables to connect the RCA outputs of the

DQ-61 to your after market amplifier(s). If this is not obvious to

you, quickly pack up your DQ-61 and run to your nearest autho

rized AudioControl dealer to have them perform the installation.

You will thank us later.

Summary of Contents for DQ-61

































Search results

Summary of Contents for DQ-61

Reviews:

Related manuals for DQ-61

Brands by name

Popular brands

AudioControl DQ-61, User Manual

Search results

Summary of Contents for DQ-61

Reviews:

Related manuals for DQ-61

Brands by name

Popular brands