AudioCodes MediaPack MP-112, User Manual

Page: 495 / 622

Version 6.6 495 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
123456789. In addition, a lifetime of 28800 seconds is selected for IKE
and a lifetime of 3600 seconds is selected for IPSec.
Note: For a detailed description of this table, see 'Configuring IP Security
Associations Table' on page 138 .
IPSec Proposal Table
Web: IP Security
Proposal Table
EMS: IPSec Proposal
Table
[IPSecProposalTable]
This table parameter defines up to four IKE proposal settings, where each
proposal defines an encryption algorithm, an authentication algorithm,
and a Diffie-Hellman group identifier.
[ IPsecProposalTable ]
FORMAT IPsecProposalTable_Index =
IPsecProposalTable_EncryptionAlgorithm,
IPsecProposalTable_AuthenticationAlgorithm,
IPsecProposalTable_DHGroup;
[ \IPsecProposalTable ]
For example:
IPsecProposalTable 0 = 3, 2, 1;
IPsecProposalTable 1 = 2, 2, 1;
In the example above, two proposals are defined:

Proposal 0: AES, SHA1, DH group 2

Proposal 1: 3DES, SHA1, DH group 2
Note: For a detailed description of this table, see 'Configuring IP Security
Proposal Table' on page 136 .
43.4.7 OCSP Parameters
The Online Certificate Status Protocol (OCSP) parameters are described in the table
below.
Table 43-26: OCSP Parameters
Parameter Description
Web: Enable OCSP Server
EMS: OCSP Enable
[OCSPEnable]
Enables or disables certificate checking using OCSP.

[0] Disable (default)

[1] Enable
For a description of OCSP, refer to the Product Reference Manual .
Web: Primary Server IP
EMS: OCSP Server IP
[OCSPServerIP]
Defines the IP address of the OCSP server.
The default IP address is 0.0.0.0.
Web: Secondary Server IP
[OCSPSecondaryServerIP]
Defines the IP address (in dotted-decimal notation) of the secondary
OCSP server (optional).
The default IP address is 0.0.0.0.
Web: Server Port
EMS: OCSP Server Port
[OCSPServerPort]
Defines the OCSP server's TCP port number.
The default port number is 2560.
Web: Default Response
When Server Unreachable
EMS: OCSP Default
Response Determines the default OCSP behavior when the server cannot be
contacted.

[0] Disable = (Default) Rejects peer certificate.