1. The AWX6952U, AWX6952UG, AWX6952UH, and AWX6952UM need to
be turned off before changing the AA batteries.
2. Signal dropout or unexpected noise may be caused by a low battery or by
an excessive distance between the transmitter and the receiver. If you
encounter signal dropout or unexpected noise, please check the
batteries first. If the batteries are still fresh, try to readjust the antennas
on the AWR6952U receiver.
3. Avoid placing the receiver in a corner to prevent any RF reception
deterioration.
4. Avoid placing the receiver antennas close to an obstruction or close to
any metal surface.
5. Try to place the receiver as far away from the digital equipment, including
computers and CD players, as possible.
6. If more than one AWR6952U wireless microphone systems are stacked
together or placed in a rack, do not let the antennas touch each other or
cross each other.
7. Before the AWM6952U is to be used in a new location, place the
AWR6952U receiver at the intended location and walk through the area
with the transmitters to locate any radio frequency blind spots, where a
momentary loss of sound or short period of noise may occur whenever
the transmitters are moved to these spots.
8. Do not drop the transmitter on the floor or strike the transmitter with any
object.
9. Always turn off the transmitter and remove the batteries if the transmitter
is not to be used for a period of time to prevent the transmitter from being
damaged by leaking batteries.
OPERATION NOTES
-
18
-
