background image

HANDHELD WIRELESS MICROPHONE

28. WIRELESS HANDHELD MICROPHONE WINDSCREEN

29. WIRELESS MICROPHONE BODY

30. POWER LED / MUTE LED INDICATOR

31.  POWER ON/OFF & MUTE BUTTON

— This button is to be used as a power 

On/Off switch and as a mute button.  When the 

 

power is off, press this button steadily to turn on the power and the green 
Power LED Indicator will be turned on.  While the power is on, press this 
button steadily to turn off the power and the green Power LED Indicator will 
be turned off. If the power is on and this button is pressed once, this button 
will have the 

 muted and the power LED indicator will 

turn yellow. If the 

 is muted, press this button once 

again to turn off the mute and the power LED indicator will turn back to 
green. If the power level of the AA batteries is low, the power LED indicator 
will start to blink between green and yellow.

NOTE

: When the handheld microphone is muted, the MUTE icon on the 

AWR6952U receiver will not be turned on.

32. MICROPHONE BATTERY COVER

33. BATTERY HOUSING

34. BATTERIES

 --- 2 X AA alkaline batteries or 2 X NiMH rechargeable AA 

batteries.

35. INFRARED SIGNAL RECEIVING WINDOW

 --- Place this window 4 inches 

(10cm) away and facing the receiver IR window to proceed to the 
transmitter frequency setting.

BODY-PACK WIRELESS TRANSMITTER

handheld microphone

handheld microphone

handheld microphone

34

35

33

29

30

31

32

28

-

11

-

36

39

37

38

42

43

41

44

40

45

45

45

38

39

36

36

39

37

38

46

47

Summary of Contents for AWM6952U
























Reviews: