36. POWER ON/OFF & MUTE BUTTON
--- This button is to be used as a power
On/Off switch and as a mute button. When the body-pack transmitter
power is off, press this button steadily to turn on the power and the green
Power LED Indicator will be turned on. While the power is on, press this
button steadily to turn off the power and the green Power LED Indicator will
be turned off. If the power is on and this button is pressed once, this button
will have the body-pack transmitter muted and the power LED indicator will
turn yellow. If the body-pack transmitter is muted, press this button once
again to turn off the mute and the power LED indicator will turn back to
green. If the power level of the AA batteries is low, the power LED indicator
will start to blink between green and yellow.
37. POWER LED / MUTE LED INDICATOR
38. ANTENNA
39. MICROPHONE INPUT
40. BATTERY COMPARTMENT COVER
41. INFRARED SIGNAL RECEIVING WINDOW
--- This IR window is hidden
under the microphone battery cover (numeral 40). In order to
synchronize the frequency of the body-pack transmitter to the
frequency of the AWR6925U receiver, the body-pack battery cover
needs to be flipped open to expose this IR window. Place this window 4
inches (10cm) away and facing the receiver IR window to proceed to the
transmitter frequency synchronization.
42. AUDIO INPUT ATTENUATION SWITCH (0dB & -10dB)
--- This switch needs
to be set to the 0dB position when the lavalier microphone is used. This
switch needs to be set to the -10dB position when the headset microphone
is used.
43. BATTERY COMPARTMENT
44. BATTERIES
---
2 X AA alkaline batteries or 2 X NiMH rechargeable AA batteries
45. BELT CLIP
46. BATTERY COMPARTMENT COVER LATCH
47. LATCH BUTTON
CHANNEL ADJUSTMENT
OPERATION - AWR6952U RECEIVER
-
12
-
