Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8.1
Removing and installing gearbox mounting
Special tools and workshop
equipment required
♦ Support bracket -10 - 222
A-
♦ Hooks -10 - 222 A /10-
♦ Engine support bracket, ba‐
sic set -T40091-
♦ Engine support bracket,
supplementary set -
T40093-
Removing
Proceed as follows:
– Unplug electrical connector -3- from air mass meter -G70- .
– Release clamps -1 and 2- and disconnect air intake hose from
air mass meter -G70- .
– Unbolt front intake duct from lock carrier -4-.
– Remove engine cover panel.
Audi TT 2007 ➤
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
8. Assembly mountings - exploded view
61
