manualshive.com logo in svg

AuCom MVE series, User Manual

The AuCom MVE series offers high-quality motor protection and control solutions. Ensure optimal performance and longevity of your motors with our advanced technologies. Access the comprehensive User Manual for free download on our website, providing detailed instructions to effortlessly operate and maintain your MVE Series equipment.

Share
Download
background image

SPECIFICATIONS 

MVE User Manual (710-17074-00G) | 

9

 

Inputs 
 

Inputs on Controller 

Start (C23, C24)     .................................................................................................................................................   24 VDC, 8 mA approx 
Stop (C31, C32)     .................................................................................................................................................   24 VDC, 8 mA approx 
Reset (C41, C42)     ...............................................................................................................................................   24 VDC, 8 mA approx 
Input A (C53, C54)     .............................................................................................................................................   24 VDC, 8 mA approx 
Input B (C63, C64)     .............................................................................................................................................   24 VDC, 8 mA approx 
Motor thermistor (B4, B5)     ....................................................................................................................................   Trip point > 3.6 k

Ω

 

 

 .......................................................................................................................................................................................................   

Reset > 1.6 k

Ω

 

 

Inputs on power interface board 

Bypass readback input (C73, C74)     .................................................................................................................   24 VDC, 8 mA approx 
Fan Fail (C1, C2)     ...............................................................................................................................................   24 VDC, 8 mA approx 
DOL protection activated (C3, C4)     ..................................................................................................................   24 VDC, 8 mA approx 
Power supply fail input (C5, C6)     .....................................................................................................................   24 VDC, 8 mA approx 

 

NOTE 
All control inputs are potential free. Do not apply external voltage to these inputs. 

Outputs 
 

Outputs on Controller 

 

Output Relay A (43, 44)     ......................................................................................................................................   Normally Open 

 

Output Relay B (51, 52, 54)     .....................................................................................................................................   Changeover 

 

Output Relay C (61, 62, 64)     ......................................................................................................................................   Changeover 

 

Analog output (B10, B11)     ........................................................................................................................   0-20 mA or 4-20 mA 

 

Ratings of output relays on Controller 

 

..................................................................................................................................................................   10 A @ 250 VAC resistive 

 

...................................................................................................................................................................   6 A @ 250 VAC 15 p.f. 0.3 

 

....................................................................................................................................................................   10 A @ 30 VDC resistive 

 

Outputs on power interface board 

 

Main contactor (13, 14)     .....................................................................................................................................   Normally Open 

 

Bypass contactor (23, 24)     .................................................................................................................................   Normally Open 

 

Run Output/ PFC (33, 34)     ..................................................................................................................................   Normally Open 

 

Phase arm power supply control relay output (43, 44)     ................................................................................   Normally Open 

Environmental 

Degree of Protection 
 

Power Assembly     ..................................................................................................................................................................   IP00 

 

Controller   ...........................................................................................................................................................   IP54/ NEMA 12 

Operating temperature     ........................................................................................   - 10 ˚C to + 60 °C, above + 50 °C with derating 
 

Humidity   .........................................................................................................................................   5%~95% Relative Humidity 

Storage temperature     ............................................................................................................................................   - 25 ˚C to + 70 ˚C 
 

Humidity   .........................................................................................................................................   5%~95% Relative Humidity 

Operating Altitude     .............................................................................................................   0~1000 m, above 1000 m with derating 
Pollution degree     ...................................................................................................................................................   Pollution Degree 3 
Vibration   ............................................................................................................................................   Designed to IEC 60068-2-6-Fc 

EMC Emission (Designed to IEC 60947-4-2) 

Equipment class (EMC)     ...........................................................................................................................................................   Class A 
Conducted radio frequency emission     ...................................................................................   10 kHz to 150 kHz: < 120 - 69 dB µV 
 

.....................................................................................................................................................   0.15 MHz to 0.5 MHz: < 79 dB µV 

 

.................................................................................................................................................................   0.5 to 30 MHz: < 73 dB µV 

Radiated radio frequency emission    ..................................................................................   0.15 MHz to 30 MHz: < 80-50 dB µV/m 
 

.....................................................................................................................................................   30 to 100 MHz: < 60-54 dB µV/m 

 

.............................................................................................................................................   100 MHz to 2000 MHz: < 54 dB µV/m 

This product has been designed as Class A equipment. Use of this product in domestic environments may cause radio 
interference, in which case the user may be required to employ additional mitigation methods. 

Summary of Contents for MVE series



















































































Reviews:

No comments

Related manuals for MVE series

ABB HF Series Manual preview
HF Series
Brand: ABB Pages: 63
Tapeswitch C6 Technical Manual preview
C6
Brand: Tapeswitch Pages: 13
EasyIO FG Series User Manual preview
FG Series
Brand: EasyIO Pages: 12
RMG GSM 3ST User Manual preview
GSM 3ST
Brand: RMG Pages: 6
Abicor Binzel EWR Quick Install Instructions preview
EWR
Brand: Abicor Binzel Pages: 8
Dakota Digital BIM-17-2 Manual preview
BIM-17-2
Brand: Dakota Digital Pages: 6
Dakota Digital CMD-2000 Series Manual preview
CMD-2000 Series
Brand: Dakota Digital Pages: 10
Z-Wave RC-100 Quick Setup Manual preview
RC-100
Brand: Z-Wave Pages: 6
Eaton ePDU G3 Installation & Quick Start Manual preview
ePDU G3
Brand: Eaton Pages: 2
Eaton ePDU G3 Manual preview
ePDU G3
Brand: Eaton Pages: 2
Eaton PowerXL DX-NET-ETHERCAT-2 Instruction Leaflet preview
PowerXL DX-NET-ETHERCAT-2
Brand: Eaton Pages: 3
Harpo BraillePen 12 Quick Start Manual preview
BraillePen 12
Brand: Harpo Pages: 35
Hardi HC 6500 Quick Manual preview
HC 6500
Brand: Hardi Pages: 2
D&R ELECTRONICS F5S-IQ Series Installation Manual preview
F5S-IQ Series
Brand: D&R ELECTRONICS Pages: 12
Qtus DuetPro Carrycot Manual preview
DuetPro Carrycot
Brand: Qtus Pages: 52
GEA SIMATIC C7-623 Instruction Manual preview
SIMATIC C7-623
Brand: GEA Pages: 13
Technische Alternative UVR 63H Operation And Installation Manual preview
UVR 63H
Brand: Technische Alternative Pages: 68
TechGrow Humi DualPro User Manual preview
Humi DualPro
Brand: TechGrow Pages: 34

Brands by name

Popular brands

Load more brands