PROGRAMMING MENU
16J
Starter Communication
Trip Starter
16K
Network Communication
Trip Starter
16L
Heatsink Overtemperature
Trip Starter
16M
Battery/Clock
Trip Starter
16N
Ground Fault
Trip Starter
16O
RTD/PT100 A
Trip Starter
16P
RTD/PT100 B
Trip Starter
16Q
RTD/PT100 C
Trip Starter
16R
RTD/PT100 D
Trip Starter
16S
RTD/PT100 E
Trip Starter
16T
RTD/PT100 F
Trip Starter
16U
RTD/PT100 G
Trip Starter
16V
Reserved
-
16W
Reserved
-
16X
Low Control Volts
Trip Starter
20
Restricted
Factory Use Only
10.7
Load/Save Settings
The Load/Save Settings menu requires an access code and allows users to:
•
Load the EMX3's parameters with default values
•
Load parameter settings from an internal file
•
Save the current parameter settings to an internal file
In addition to the factory default values file, the EMX3 can store two user-defined parameter files. These files contain default values
until a user file is saved.
To load or save parameter settings:
1.
Open the Programming Menu.
2.
Scroll to Load/Save Settings and press the button.
3.
Scroll to the required function and press the button.
Load/Save Settings
Load Defaults
Load Backup
Load User Set 1
4.
At the confirmation prompt, select YES to confirm or NO to cancel and then
STORE to load/save the selection.
Load Defaults
No
Yes
When the action has been completed, the screen will briefly display a confirmation
message, then return to the status screens.
NOTE
The saved files and current operating settings are stored in both the keypad and in the soft starter. The keypad will
prompt you to synchronise the settings whenever it is plugged into a new EMX3.
User Manual (710-04840-00M) |
45
