Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
5
Figure 1-4 Connection of Au J1939 Simulator
plus
editions to PC with RS232 port
Figure 1-5 Connection of Au J1939 Simulator Gen II
plus
editions to PC with USB port
1.4. Major Operating Features
•
Smart features:
Recall last operating mode at power-on, capable of generating dynamic data, etc.
•
Ease of use:
Easy-to-operate design with production line operator and sales person in mind. No software setup
experience or CAN protocol configuration skill is required. After a network is physically connected, it will
dynamically generate J1939 data when it enters dynamic mode.
•
Static mode and dynamic mode:
o
Static mode output static J1939 signal. In this mode, signal can be changed manually
o
Dynamic mode automatically changes the output value of SAE J1939 signal
o
Two modes can be switched easily
•
"Remote Terminal" software available
("Plus" editions only)
:
Display simulated J1939 signal on a computer
screen.
•
All push button control functions are available on PC "Remote Terminal" software
("Plus" editions only)
•
Easy in-field license upgrade feature
with Au License Management Tool. The Basic Edition(s) and Premium
Edition(s) can be easily upgraded to Platinum Edition(s)
•
In-field firmware update capability
for minor upgrades (SVS-SIM-J1939) and major upgrades (FIRJ1939-00x)
•
Annual support and minor upgrade services
are available
(SVS-SIM-J1939)
•
Major firmware upgrade capability available
(FIRJ1939-00x)
•
Custom design is available upon request
1.5. Basic Functions of Each Edition
Engine Basic Edition(s):
•
"Statically" or "dynamically" generate most of the basic engine data
•
Push
buttons
(
Up
&
Down
) are used in "static mode" to adjust data outputs
•
In "dynamic mode", data cycles automatically in its SAE defined range
•
LEDs indicate the control step value and reflect push button operations
