Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
25
Chapter 5
Data Configuration
Table 5-1 lists some special simulation result at control step value of 0%, 20%, 40%, 60%, 80%, and 100%. Please refer
to Table 5-9 through Table 5-18 for a complete list.
Table 5-1 SAE J1939 Simulation result vs. Control Step Values
J1939 Parameters
0%
20%
40%
60%
80%
100%
RPM (rpm)
0 1606.4 3212.8
4819.1
6425.5
8031.9
Engine Hour (Hr)
0
250
500
750
1000
999999
Vehicle Speed (MPH)
0
31.2
62.4
93.6
124.8
156
Engine Oil Pressure (PSI)
0
29
58
87
116
145
Engine Oil Temp (F)
-459.4
-40
104
248
392
3154.9
Engine Oil Level (%)
0.0%
20.0%
40.0%
60.0%
80.0%
100.0%
Engine Coolant Temp (F)
-40
50
140
230
320
410
Engine Coolant Pressure (PSI)
0
14.5
29
43.5
58
72.5
Engine Coolant Level (%)
0.0%
20.0%
40.0%
60.0%
80.0% 100.0%
Battery Voltage (V)
0
7.5
15
22.5
30
3212.8
Engine Boost Pressure (PSI)
0
14.5
29
43.5
58
72.5
Actual Engine % Torque
0
0.25
0.5
0.75
1
1.25
EGR Mass Flow Rate (Kg/Hr)
0 642.55 1285.1 1927.65
2570.2
3212.75
Accelerator Position (%)
0.0%
20.0%
40.0%
60.0%
80.0%
100.0%
Engine Load % (%)
0
0.25
0.5
0.75
1
1.25
Instant Fuel Economy (MPG)
0
22.5
45
67.5
90
295.2
Instant Fuel Rate (GPH)
0
15
30
45
60
848.7
Fuel Level (%)
0.0%
20.0%
40.0%
60.0%
80.0%
100.0%
Engine Fuel Temp (F)
-40
50
140
230
320
410
Inlet Air Temp (F)
-40
32
104
176
248
410
Exhaust Gas Temp (F)
-459.4
-44
371.3
786.7
1202
3154.9
Engine Trip (mile)
0
310.7
621.4
932.1
1242.7 621372.1
Total Vehicle Distance (mile) 0
621.4 1242.7
1864.1
2485.5
621372.1
Nominal Friction % Torque
0.0%
25.0%
50.0%
75.0% 100.0%
125.0%
Inlet Air Mass Flow Rate
0 642.55 1285.1 1927.65
2570.2
3212.75
Engine Air Inlet Pressure
0
14.5
29
43.5
58
72.5
Vehicle Identification (VIN)*3
0
*020
*030
*060
*080
*100
Transmission Oil Temp (F)*4
-459.4
-40
104
248
392
3154.9
Note
:
1. Engine Clock is a self-running clock parameter, it will automatically change every minute.
2. Cruise light will be on when control steps are larger than 40%.
3. The first 14 digital bit of the 17-bit VIN number is "1M8GDM9AXKP042***", the last 3-bit changes from 000 to
100
4. Transmission oil temp is
only
available for vehicle platinum edition and vehicle platinum plus edition.
For Engine Premium edition(s) and Vehicle Platinum edition(s), when the warning is turned on, changing the control step
value will generate different warnings signals. The warning info will also be displayed on the remote terminal. The
specific warning message, SPN, and FMI are listed in Table 5-2 for reference. When the warning is turned off, all
Engine/ABS/Transmission DM1 warning will be off.
Table 5-2
Controlled Steps vs. "Engine IS lamps" ON status
Engine Idle Shutdown (IS)
Control Step Values
IS Timer ON
4, 5, 6, 7, 100%
IS Timer EN
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 100%
IS Timer Override
9, 10, 100%
IS Shutdown Engine
2, 3, 100%
IS Driver Alert
4, 5, 100%
