Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
21
4.10.
Display Panel – Engine DM1
Engine DM1 message could be one packet (without warning or with 1 warning) or multi-packets.
•
When engine DM1 is a single packet message, SPN, FMI, OC, CM will display (Figure 4-15).
•
When engine DM1 is a multi-packet message, the "see @ Multi-Packets" info will display, and the "Multi-
packets" button will be active (Figure 4-16). Click the button, the whole list of engine DM1 will display (Figure 4-
17).
If Engine DM1 warning is off, a SAE defined non-warning message will be shown as (0,0,0,0).
4.11.
Display Panel – Engine DM2
Engine DM2 message could be one packet or multi-packets.
If engine DM2 is a single packet, SPN, FMI, OC, CM will display (Figure 4-18).
If engine DM2 is in multi-packets format, “see @ Multi-Packets” will display, “Multi-packets” button will be active (Figure
4-19). Click on the button, the whole list of engine DM2 will display (Figure 4-20).
