AU SAE J1939, User Manual

Page: 13 / 48

Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
13
Figure 3-7 Power, Range, 20%, 40%, 60%, 80% are constant on, “ ▲ 100%” LED blinks, indicating data reaches 100%
•
▼ 0% LED will be triggered on or off when pressing Down button, accompany with the decreasing brightness of
Range LED. A press on the Down button will also decrease the control step value and all simulated data. When
the control step value equals to 0%, ▼ 0% LED blinks.
The control step value vs. LED indicator status is summarized in Table 3-2.
Table 3-2 Control step value vs. LED indicator status (in Static Mode)
Step Operation LED Status
1 Connect +12~+24 V DC power supply
Power, Range LED on, the rest LED will recall
the last saved status at Static mode
2 Press Down button ▼ 0% LED on/off
3 Continue press Down button until control step value = 0% ▼ 0% LED blink
4 Press Up button ▲ 100% LED on/off
5 Continue press Up button for control step value 1 to 19% Power, Range LED constant on
6 Continue press Up button for control step value 20% Power, Range LED on, 20% LED Blink
7 Continue press Up button for control step value 21 to 39% Power, Range LED on, 20% LED on
8 Continue press Up button for control step value 40% Power, Range, 20% LED ON, 40% LED Blink
9 Continue press Up button for control step value 41 to 59% Power, Range, 20%, 40% LED on
10 Continue press Up button for control step value 60%
Power, Range, 20%, 40% LED on, 60% LED
blink
11 Continue press Up button for control step value 61 to 79% Power, Range, 20%, 40%, 60% LED on
12 Continue press Up button for control step value 80%
Power, Range, 20%,40%, 60% LED on, 80%
LED blink
13 Continue press Up button for control step value 81 to 99% Power, Range, 20%, 40%, 60%, 80% LED on
14 Continue press Up button for control step value 100%
Power, Range, 20%, 40%, 60%, 80% LED on,
▲ 100% blink