Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
14
Chapter 4
Au J1939 Simulator Remote Terminal
For all
Au SAE J1939 Simulator Gen II 2.00A "
Plus
"
editions, the "
Au J1939 Simulator Remote Terminal Ver. 2.00A
"
software can be used to control and display simulated SAE J1939 signals from a personal computer.
The
Remote Terminal Ver 2.00A
software requires a minimum simulator firmware version of 0.2A or higher. Otherwise, it
will not function and a warning message will pop up, as shown in Figure 4-1.
Figure 4-1
Warning message about minimum firmware requirement
The Remote Terminal GUI (Graphic User Interface) includes a control panel and a display panel. Control panel is
located in the up-left corner. All the other area is used for displaying information like engine/ABS/Transmission info,
warning lamp, etc. as shown in Figure 4-2, 4-3, 4-4.
Figure 4 -2 shows the J1939 Simulator Remote Terminal GUI for Au SAE J1939 Simulator (Gen II) 2.00A
vehicle
platinum
plus
edition
. All features are active.
Figure 4–2
PC Remote Terminal–Gen II 2.00A Vehicle Platinum Plus Edition
Au
J1939 Simulator Remote Terminal Structure is summarized in Figure 4-3:
