7-4
FLEXNET – FNER Expandable (Modular) Routing Switches – Installation & Operation Manual
CHAPTER 7: FACTORY CONFIGURATION SETTINGS
Figure 28: SRR Module Size
7.6.3 SRO Module Size
Option 2 of the Module Size Menu will load the SRO Module Size screen of Figure 29.
The number of input rows for each SRO output module is specified via this screen. This number should not be changed
unless the type of SRO is changed.
To get to the SRO Module Size screen from the main menu: key sequence 2, 1, (factory settings code F1), 1, 3, 2
2. System Options
1. Configuration (factory settings code F1)
1. System Setup
3.
Module
Sizes
2.
SRO
Module
sizes
Figure 29: SRO Module Size
7.7 Load Firmware
Option 2 from the Configuration Menu displays the Load Firmware screen. The Load Firmware screen shown in Figure 30,
enables you to upgrade the internal firmware level of the MPC 128 unit.
To get to the Load Firmware screen from the main menu: key sequence 2, 1, (factory settings code F1), 2
2. System Options
1. Configuration (factory settings code F1)
2. Load Firmware
Figure 30: Load Firmware
Pressing F1 will put the MPC 128 in a special firmware download mode. The screen shown in Figure 31 will load. Only press
F1 if you have the firmware ready for download.
Figure 31: Download Firmware
