Atten Gratten GA1483, User Manual

Page: 50 / 74

39
39
Signal Generator
4. Press the ΦM/ Rate soft function key, and input10kHz.
Thus, the modulation rate is set as 10kHz.
The signal generator is now already configured as a carrier wave that outputs 0dBm
and performs phase modulation at 3GHz, the phase offset of the carrier wave is 0.25
rad, the modulation rate is 10 kHz, and the carrier wave is a sine wave in waveform.
3-4-4 Run phase modulation
1. Press MOD Off On .
MOD display indicator will be opened to point out that you have already run
MOD Off On.
2. Press ΦM Off On .
ΦM display indicator will be opened to point out that you have already run
phase modulation.
3. Press the RF On Off key on the front panel.
At the moment, the RF ON indicator is activated, which proves that the signal
can be acquired from the RF OUTPUT connector.