Atten Gratten GA1483, User Manual

Page: 52 / 74

41
41
Signal Generator
The signal generator is now already configured as a carrier wave that outputs 0dBm
and performs pulse modulation at 2GHz, the pulse period of the carrier wave is 100
us, the pulse width is 24 us, and the modulation source is set as internal self
excitation. (Please note that the internal self excitation is the default value of the
modulation source (Pulse Source) soft function key. )
3-5-4 Activate pulse modulation
1. Press the Mod Off On key .
At the moment, the MOD ON indicator is activated to show that modulation
on-off is run.
2. Press Pulse Off On .
Thus, pulse modulation is activated. The Pulse display indicator will be opened
to point out that you have already run pulse modulation.
3. Press the RF On Off key on the front panel.
At the moment, the RF ON (RF On) indicator is activated, which proves that the
signal can be acquired from the RF OUTPUT connector.