Atten Gratten GA1483, User Manual

Page: 13 / 74

4
1-1-3 Connect the power source
The signal generator can use an AC power source.
Please use the power cord provided in the accessories to connect the signal
generator to the AC power source. Related to the requirement on the AC power
voltage and frequency, please check the introduction in the chapter of
‘‘Characteristics of back panel’’.
Caution
In order to avoid electric shock, please make sure that the
instrument is grounded rightly.
1-1-4 Booting check
Turn on the main switch on the back panel, and then press a power key on the front
panel to run the signal generator. A booting picture will be displayed when the signal
generator is booted, and a default interface will appear on the screen after tens of
seconds. After initialization, the signal generator is in the normal working mode.