Atten Gratten GA1483, User Manual

Page: 54 / 74

43
43
Signal Generator
Thus, the start frequency of the sweep sine wave is set as 100 Hz.
3. Press the LF Out Stop Freq soft function key, and input 1kHz.
Thus, the stop frequency of the sweep sine wave is set as 1 kHz.
4. Press RETURN .
Thus, return to the low-frequency output menu. The waveform will be displayed
below the LF Output Waveform soft function key.
3-6-3 Run LF Output
1. Press the MOD Off ON key.
At the moment, the MOD ON indicator is activated to show that the modulation
on-off is run.
2. Press LF Output Off On .
Thus, low-frequency output will be activated. The LF indicator is activated to
show that you have already run low-frequency signal output.