ATSG FORD 4R100, Manual

Page: 97 / 120

AUTOMATIC TRANSMISSION SERVICE GROUP
Technical Service Information
97
Copyright © 2003 ATSG
COAST CLUTCH
SEAL RINGS ARE
LOW ON PUMP TOWER
(LIKE E4OD)
COAST CLUTCH
SEAL RINGS ARE HIGHER
ON THE PUMP TOWER
USED WITH THE "STAMPED STEEL"
COAST CLUTCH DRUM
USED WITH THE "CAST IRON"
COAST CLUTCH DRUM
Ford Ford
RF-F81P-7B324-AA
107
98
Copyright © 2003 ATSG
Ford Ford
RF-F81P-7B324-AA
107
98
Sn
ap
-On
Copyright © 2003 ATSG
Figure 164
Figure 165 Figure 166
OIL PUMP
COVER
OIL PUMP
STATOR SHAFT
ASSEMBLY
RETAINING
BOLTS (3)
COAST CLUTCH
SEAL RINGS (2)
Oil Pump Body And Cover Assembly (Cont'd)
11. If removal was necessary because of damage,
refer to Figure 164, to ensure the replacement
part is correct.
12. Install the stator shaft assembly into the pump
cover, as shown in Figure 165, and torque the
3 retaining bolts to 9-11 N·m (80-100 in.lb.),
as shown in Figure 166.
13. Install the two coast clutch sealing rings into
their grooves in the stator shaft assembly, as
shown in Figure 165.
Continued on Page 98.