Atrie DB-120 WL User Manual
Page 7 / 25
3 CONFIGURATION
3.1 DEFAULT CONFIGURATION
The default configuration is 1483 bridge LLC encapsulation. If you only use this mode, there is no need
to configure. The Gateway has pre-configuration the follow PVCs:
Table 3.1
Name
VPI
VCI
pvc_0_32 0
32
pvc_8_35 8
35
pvc_0_35 0
35
pvc_8_81 8
81
pvc_0_100
0 100
pvc_14_24
14 24
3.2 CONFIGURATION OF COMPUTER
The default IP address for the Gateway is: 192.168.1.1 and the subnet mask is: 255.255.255.0. Users can
configure the Gateway through an Internet Browser. The Gateway can be used as gateway and DNS server
then users need to set the computer’s TCP/IP protocol as follow:
1.
Set the computer’s IP address at same segment of the Gateway, such as set the IP address of the
network card to one of the "192.168.1.2" - "192.168.1.254".
2.
Set the computer’s gateway the same IP address as the Gateway’s.
3.
Set computer’s DNS server the same as the Gateway’s IP address or that of an effective DNS server.
3.3 GENERAL OPERATION
3.3.1 LOG IN
Open the browser; input "http://192.168.1.1" at the address column. Press "Enter" key then the log
interface is shown as Figure 3.1. Input
"Username"
and
"Password"
(capital sensitive), then press "Enter".
The default account is
"admin"
and the default password for this account is
"password"
.
Figure 3.1
