Atrie DB-120 WL User Manual
Page 6 / 25
Introduction:
1.
Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on
the wall.
2.
Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the
Gateway.
3.
Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4.
Connect Ethernet port of the Gateway with 10/100BASE-T port of the computer using the network
cable that comes with the modem.
5.
Plug in the power cord, and turn on the power.
If you do not want Internet services and telephone voice services simultaneously, please just connect the
LINE port of the Gateway with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this case,
the splitter is not necessary.
2.3 LED STATUS INDICATION
Table 2.3
Status
ON
Flashing
Fast Blinking
OFF
POWER
Normal Operation
N/A
N/A
Power not applied
WAN
DSL line is trained
DSL is
training
DSL is transforming data
DSL line not Connected
PPPoE
PPPoE link
established
N/A
N/A
No PPPoE link established
LAN/WiFi
Green: Ethernet is
connected
Red: Wireless works.
Ethernet or wireless traffic
is flowing
Ethernet and Wireless is not
connected;
