Atrie DB-120 WL User Manual
Page 13 / 25
Figure 3.6 (Static IP Connection Setup)
3.4.7 CLASSICAL IP OVER ATM (CLIP, DEFINED IN RFC1577)
CONNECTION SETUP
The Classical IP over ATM (CLIP) support provides the ability to transmit IP packets over an ATM
network, The CLIP support will encapsulate IP in an AAL5 packet data unit (PDU) frame using RFC1577and it
utilizes an ATM aware version of the ARP protocol (ATMARP. The CLIP support only allows for PVC support;
it does not support SVC.
To configure the Gateway for a CLIP connection, click on Setup and then click on New Connection. At
the Type field select CLIP and the CLIP connection setup page is displayed; Figure 3.7 illustrates a typical CLIP
configuration. Give your CLIP connection a unique name; the name must not have spaces and cannot begin
with numbers. In this case the unique name is called CLIP1. Select the VPI and VCI settings; your DSL
service provider or your ISP will supply these; in this case the DSL service provider is using 0,35. You can
also enable Network Address Translation (NAT) and the Firewall options. If you are unsure, leave these in the
default mode.
Figure 3.7 (CLIP Connection Setup)
