Atrie DB-120 WL User Manual
Page 5 / 25
2 INTRODUCTION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
Item
Name
Introduction
POWER
Red, Indicates the status of the power connection.
WAN
Yellow, Shows DSL line status.
PPPoE
Green, Indicates the status of internal PPPoE.
Indicator
LAN
Green, Indicates the status of Ethernet interface.
LINE
Connected with phone line or "ADSL" port of the splitter.
ETHERNET
To be connected to a PC network card by a straight-through network cable,
also can use a crossover cable to connect to Hub, Switch or Router.
POWER
Power interface, Connect with power adapter.
RST
The RST button will set the Gateway to its factory default setting and
reset the Gateway. You may need to place the Gateway into its factory
defaults if the configuration is changed, you loose the ability to interface to
the Gateway via the web interface, or following a software upgrade, and you
loose the ability to interface to the Gateway. To reset the Gateway, simply
press the reset button for more than 10 seconds. The Gateway will be reset
to its factory defaults and after about 30 seconds the Gateway will become
operational again.
Interface
SWITCH
To turn on / off the power.
2.1.2 SPLITTER SPEC
Table 2.2
Interface
Introduction
LINE
Connected with telephone line.
ADSL
Connect with the LINE port of the Gateway by
telephone line provided.
PHONE Connect
with
telephone.
2.2 HARDWARE CONNECTION
Figure 2.1
