Atrie DB-120 User Manual
User Manual
4
1.
INTRODUCTION
The ADSL gateway is the perfect high-speed WAN bridge/router. This full-featured product is
specifically designed to connect to the Internet and directly connect to your local area network via
high speed 10/100 Mbps Ethernet. The gateway also has full NAT firewall and DMZ services to
block unwanted users from accessing your network.
For you game users, We has already pre configured the gateway for several low latency game ports.
Just click on the game you are playing on line and the rest is done for you
The gateway is fully compatible with all PCs; as long as the PC supports an Ethernet interface and is
running a TCP/IP protocol stack, your PC can have high-speed WAN access. So, plug in the gateway
(using quick start guide), configure the gateway (per your ISP’s requirements) and enjoy the Internet
like never before.
1.1
FEATURES
•
Equipped With a 1 or 4-Port 10/100 Ethernet Switch
•
Connects multiple PCs to the Internet with just one WAN IP Address (when configured in
router mode with NAT enabled)
•
Configurable through user-friendly web pages
•
Supports Single-Session IPSec and PPTP Pass-Through for Virtual Private Network (VPN)
•
Several popular games are already pre configured. Just enable the game and the port settings
are automatically configured.
•
Configurable as a DHCP Server on Your Network
•
Compatible with virtually all standard Internet applications
•
Industry standard and interoperable DSL interface
•
Address Filtering, DMZ Hosting, and Much More
•
Simple web based status page displays a snapshot of your system configuration, and links to
the configuration pages
•
Downloadable flash software upgrades
•
Support for up to 8 Permanent Virtual Circuits (PVC)
•
Support for up to 8 PPPOE sessions
•
Supports Classical IP over ATM (CLIP or also referred to as RFC5177)
1.2
YOUR GARTEWAY AT A GLANCE
Your gateway has several ports, switches and LEDs. Let’s take a look at the different options.
Depending upon your model of gateway, your gateway may have some or all of the features listed
below
1.3
PORTS AND BUTTONS
Restore to Factory Defaults:
The restore to factory defaults button will set the gateway to its factory
default setting and reset the gateway. You may need to place the gateway into its factory defaults if
the configuration is changed, you loose the ability to interface to the gateway via the web interface, or
following a software upgrade, and you loose the ability to interface to the gateway. To reset the
gateway, simply press the reset button for more than 10 seconds. The gateway will be reset to its
factory defaults and after about 30 seconds the gateway will become operational again.
