Atrie DB-120 User Manual
User Manual
16
Figure 9 (CLIP Connection Setup)
To complete the connection you must now click the apply button. The apply button will temporarily
save this connection. To make the change permanent you need to click on
Tools
(at the top of the
page) and select
System Commands
. At the system commands page, click on
Save All
.
3.4.2
MODIFY AN EXISTING CONNECTION
To modify an existing connection, from the Home screen, click setup and then click the connection
you want to modify. The connections are listed as Connection 1 through Connection 8
As a note, if you delete the connection, to make the change permanent you need to click on
Tools
(at
the top of the page) and select
System Commands
. At the system commands page, click on
Save All
.
3.4.3
MODEM SETUP
To configure the DSL modulation type, go to the Home screen, Click setup. Under WAN Setup,
select Modem Setup. This will bring up the modem setup screen. Leave the default value if you are
unsure or the DSL/ISP did not provide this information. For most all cases, this screen should not be
modified.
The apply button will temporarily save this connection. To make the change permanent you need to
click on
Tools
(at the top of the page) and select
System Commands
. At the system commands page,
click on
Save All
.
3.5
Configuring The LAN
By default, your gateway has DHCP server (LAN side) enabled. If you already have a DHCP server
running on your network, you
must
disable one of the two DHCP servers; if you plug a second DHCP
server into the network, you will experience network errors and the network will not function
normally.
