Atrie DB-120 User Manual
User Manual
25
Figure 18 (Dynamic Routing)
The apply button will temporarily save this connection. To make the change permanent you need to
click on
Tools
(at the top of the page) and select
System Commands
. At the system commands page,
click on
Save All
.
3.7
TOOLS
The gateway supports a host of tools which will allow you to customize and debug your gateway.
3.7.1
SYSTEM COMMANDS
To make the changes permanent you need to click on
Tools
(at the top of the page) and select
System
Commands
. The following commands are used to configure the gateway:
a.
Save all: Press this button in order to permanently save the current configuration of the
Gateway. If you do re-start the system without saving your configuration, the Gateway will
revert back to the previously saved configuration.
b.
Restart: Use this button to re-start the system. If you have not saved your configurations,
the Gateway will revert back to the previously saved configuration upon re-starting. NOTE:
Connectivity to the unit will be lost. You can reconnect after the unit reboots.
c.
Restore Defaults: Use this button to restore factory default configuration. NOTE:
Connectivity to the unit will be lost. You can reconnect after the unit reboots.
3.7.2
REMOTE LOG
The remote log feature is used in conjunction with the PC tool (software provided with your gateway).
For PPPoE and PPPoA connections, you can select debug if you want to log the connection
information. This is helpful when trying to debug connection problems.
The remote log feature will forward all logged information to the remote PC. The type of information
forwarded to the remote PC depends upon the Log level. Each log message is assigned a severity
level, which indicates how seriously the triggering event affects router functions. When you configure
