Atop SE59XX-SDK, User Manual, Page: 53 / 75

SE59XX-SDK
Software development Kit
User Manual
V1.2
5.3 Test Digital Input
Upload the test file “di_test” from ./software/atop_application folder into /jffs2 and execute the following
command on the kernel shell:
./di_tes t
You can see the message print DI0/1 value.
5.4 Test Digital Output
Upload the test file “do_test” from ./software/atop_application folder into /jffs2 and execute the following
command on the kernel shell:
./do_tes t
You can use multimeter to check the DO0/1 turn on 5 sec then turn off .
5.5 Test Hardware Relay Output
Use tes t tool “ relay” to test HW relay device .
./ relay
You can use multimeter to check the relay turn on then turn of f af te r 10 sec.
5.6 Test Hardware Button
Use test tool “button” to get “press” then “release” event.
./button
5.7 Test Hardware Watchdog Interface (WDT)
Upload test file “hwd” from ./software/atop_application folder into /jffs2 and execute the following command
on the kernel shell: