Atop SE59XX-SDK, User Manual, Page: 20 / 75

SE59XX-SDK
Software development Kit
User Manual
V1.2
Note:
This example is made with SE5901A. All other models of SE59XX family share the same method.
Figure 2.11 Firmware selection
Note that the extension file name of upgraded firmware should be .dld
2.4 Verify current firmware version
There are two methods to verify the fi rmware version:
1) Use a debug line as pe r Par agra ph 2.3 .1 above to connect console por t of the device . Aft e r boot up, ty pe
“a top_show_ver” in the console command line to check curr ent ve rsion as Figure 1-13 shown. The red
rectangle shows information of boot-loader (V1.00), Ke rnel ( V1.00) and AP (V1.00) version number .
Figure 2.12 Fi rmware version - Console
2) Use Device Manager or Device Management U tili ty ( Se rial Manager ) to check version number as pe r
Figure 2.13. (Device Manager is cur rently su p por ted to Simplified Chinese release )