Atop SE59XX-SDK, User Manual, Page: 50 / 75

SE59XX-SDK
Software development Kit
User Manual
V1.2
atop_tcp_server RS232 115200 &
2) Type "ps -ef" from super terminal program to check if atop_tcp_server is executed as
Figure 5.2
Figure 5 .2 P rocess execution on SE5904D, example
3) Connect loopback for COM1 and execute TCPtest from MS-Windows as Figure 5.3
Figure 5.3 Setup TCPtest.exe for COM port loopback test
4) Select the TCP_Server mode and input IP address and TCP port number for COM1.
5) Click "Connect" to make TCP connections. The data keyed in "Send" box will be sent through the
COM port. "Send Loop" is used to send continuously every certain period of time.
6) Click "Send One" to start the data transmission from PC to COM port. The data received from
loopback link will be shown on the lower part "Receive" box of the Window as Figure 3-4.
7) You should be able to see "Hello" as hexadecimal display of each character "48 65 6C 6C 6F 0D 0A"
shown on "Receive" box.