Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
39
of
49
Figure 2.46 SNMP v1/v2c Trap Management
If
SNMP Agent Version
is set to
SNMP v3
, the
SNMP v3 Configuration
and
SNMP v3 Trap
sections will become
active as shown in Figure 2.47. This web page provides detailed setup of SNMP v3 Configuration and SNMP v3 Trap
Server.
Figure 2.47 SNMP v3 Feature
To configure SNMP v3, the user can click the gear icon next to the
SNMP v3 Configuration
to bring up the pop-up
window as shown in Figure 2.48. On this window, there are four sections:
SNMP v3 User Configuration
,
SNMP v3
Group Configuration
,
SNMP v3 View Configuration
, and
SNMP v3 Access Configuration
. Under the
SNMP v3 User
Configuration
, the user can add new SNMP’s user by filling new
User Name
and set
Security Level
,
Authentication
Protocol
,
Authentication Password
,
Privacy Protocol
and
Privacy Password
. After finished entering all information,
click
Add
button to add the new SNMP’s use
r. Note that you can delete existing user by clicking on
Delete
button in
front of that particular
User Name
.
SNMP v3 Group
,
View
, and
Access
can also be configured in the same manner
