Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
40
of
49
as described for
SNMP v3 User Configuration
. After you finished, clicking on the
Save Changes
button to save any
changes or clicking on the
Save Changes and Apply
button to save and apply the setting.
Figure 2.48 SNMP v3 Configuration Pop-up Window
To configure
SNMP v3 Trap Server
, the user can click the gear icon next to the
SNMP v3 Trap
in Figure 2.47 to bring
up another pop-up window as shown in Figure 2.49. On this window, the user can set the
SNMP v3 Trap Server IP
address and choose the
User nam
e previously configured in
SNMP v3 User Configuration
. After clicking on
Add
button, the new entry will be added to the
SNMP v3 Trap List
shown in the lower part of the window. You can delete
an entry from
SNMP v3 Trap List
by selecting that particular entry and clicking on the
Remove
button.
Figure 2.49 SNMP v3 Trap Server Setting Pop-up Window
