Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
21
of
49
Label
Description
Factory Default
Daylight Saving
State
This option allows the user to enable or disable
Daylight Saving on the switch
Disable
Start Date
Define the start date of daylight saving
NULL
End Date
Define the end date of daylight saving
NULL
Offset
Decide how many hours to be shifted
forward/backward when daylight saving time begins
and ends. See note below.
0
2.3.3
Port Status feature
The third feature under the system setting function is the
Port Status
feature as shown Figure 2.17. The overview of
port status on the managed switch can be viewed in this webpage. Each entry in the table of the port status shows
information related to a port on the managed switch which are
Port No
.,
Mode
,
Enabled
,
Link
,
AN-Config/Actual
,
Speed-Config/Actual
,
Duplex-Config/Actual
,
Flow Control-Config/Actual
, and
Security
. Note that the last column
reports the security status whether it is turned on or off on each port, which can be either static security or 802.1x.
To check the latest status of all port, click the
Refresh
button at the bottom of the webpage.
The header in each column and its possible values of the ports
’
s status are listed here:
◼
Port No
. (Port 1 to Port 8)
◼
Mode
(Copper (C) or Fiber (F))
◼
Enable
(Yes or No)
◼
Link
(Up or Down)
◼
AN or Auto Negotiation
(Auto or Force)
◼
Speed
(unit:
Mbps)
◼
Duplex
(Full or Half)
◼
Flow Control
(On or Off)
◼
Security
(On or Off): Either static security or 802.1x port security is turned on or off.
Note:
Config
column means the configuration on the device while
Actaul
column refers to the current status or
operation of the port.
Figure 2.17 Port Status Feature
