MISSION2 User Manual
* Press button C to enter the Advanced setting.
* Press button B button to start diving
3.3.2 Scuba Settings
Press button C in Scuba preparation screen to enter the
Advanced Settings.
※
Do not change any setting until you understand the effects
Adjustable Function:
Dive Plan
※
Dive plan is used to estimate the
no-decompression limit for diving at the
planned depth at a specified time in the
future
See
Dive Alarm
Time Alarm: Time Alarm display notifies the
diver when the Dive Time has been reached.
(1 set)
Depth Alarm: Depth Alarm notifies the diver
when the maximum depth has been reached.
(1 set)
SPG Alarm
SPG Alarm notifies the pressure when the set
dive time has been reached.
(10 sets)
PPo2
Adjustable between 1.2 - 1.6, this setting is
related to the MOD (Maximum Operation
Depth).
Conservatism
Conservatism: HIGH (GF 35/75)
Conservatism: MEDIUM (GF 40/85)
Conservatism: LOW (GF 45/95)
Conservatism: CUSTOM
! ! ! Adjusting GF (Gradient Factor) will affect
decompression calculations. For more detail,
please refer to Erik Baker's (Clearing up the
Confusion About Deep Stops)
Dive Site
See
Safety Stop
Ascend to 6 meters, start a 3-minute safety
stop, and the countdown interval is 3-7 meters
Set the ON/OFF and adjust the stop time.
Surface
Internal
Reminder
After returning to the surface for a surface
interval, a notification for dive will be sent when
the set surface interval has been reached
Freshwater/Se
awater
Depth correction based on
Freshwater/Seawater The density of salt water
is about 3% higher than that of fresh water, and
the depth of fresh water will be deeper under
the same pressure value
Air/Nitrox
Setting
While in Scuba Mode, Press button B to enter
Advanced settings. Then scroll to the Air Mix
13