MISSION2 User Manual
3.5.3 Gauge Screen Layout and Alarms
Predive
Upper-left: Compass heading
Mid-left: Water temperature
Upper-right: Set time alarm
Mid-right: Current depth
Bottom-right: set depth alarm
During the dive
Upper-right: Stopwatch (Button A:
Start/Reset)
Mid-right: Current depth
Bottom-right: Dive time
Upper-left: Compass
Mid-left: Water temperature
- Press button E: Turn the backlight
On/Off.
4. GPS
4.1 Dive GPS
※
MISSION2 is waterproof up to 100 meters. Thus, with the
air-tight case, unlike mobile phones, which can expose the
antenna for signal reception, the GPS function is only
suitable for outdoor areas.
Weather, shade, and
environment will all cause interference, and there is no
guarantee that the GPS can be positioned.
※
When GPS is acquired (At surface)
Entry point
* Descend while GPS is acquired can mark the entry point,
which will show on the map in the dive log in ATMOS App.
Exit point
* Ascend to surface and acquire the GPS before divemode
ends will mark the exit point, which will show on the map in
the dive log in ATMOS App.
Nearby site/ Add site/ My list
* You can also add a new dive site or use the Nearby site
feature when GPS is acquired
Enable Sunrise/set time
24
