MISSION2 User Manual
How to acquire GPS signal
1. Locate at an open area with unobstructed view of the sky.
Make sure the watch face is pointed to the sky. (may take 5-8
minutes)
2. Switch to any dive mode > press button C to go to DIVE SITE
> NEARBY SITES , wait for acquiring GPS.
P.S. Using the “sync GPS” function in ATOMS App to
sync the satellite ephemeris data into MISSION ONE,
which shortens the time needed to acquire the GPS
signal.
4.1.1 Water entry and exit records
Entry point:
When switching to the preparation screen before
diving, a blinking GPS indicates that the GPS is
being positioned, and the icon will stop blinking
when the positioning is complete. Water enter will
be recorded when diving after GPS positioning.
Exit point:
MISSION2 will automatically locate and record the
water exit before the end of dive.
The water entry and exit points can be displayed from the map
when the long is synced to the App. The arrow down is the
water enter location, and the arrow up is the water exit location.
4.1.2 Dive Site
Dive Site function can be accessed in Scuba, Freedive, Gauge
Mode's advanced setting prior to descent after the GPS
positioning is complete.
1. Nearby Sites: Show 10 nearby dive sites in the ATMOS
database.
2. Add: Add new set of dive sites named by date and with
GPS location * You can also add, synchronize, and
change dive site names through ATMOS App
25
