13
ATAB5749 [APPLICATION NOTE]
9138B–AUTO–07/15
3.
Hardware Compatibility Issue
The latest ATAB-RFMB hardware version is necessary for programming the ATAB5749. For hardware delivered before July
2008, the resistor R7 (1k
) on the transmitter interface board must be replaced with 0
resistor. Refer to
for the
position of the R7.
A grey jack is generally delivered with the older version of the Atmel transmitter board. This is not the case for ATAB5749.
This kind of jack may not be used for ATAB5749; if used, the functionality of the board is not guaranteed.
Figure 3-1.
Transmitter Interface Board - Hardware Modification
