AT-OME-TX21-WP-E
37
The Web GUI
System page
IP Mode
Click this toggle switch to set the IP mode of the AT-OME-TX21-WP-E. The default setting is
DHCP
.
Available settings:
STATIC IP
,
DHCP
.
IP
Enter the IP address of the AT-OME-TX21-WP-E in this field. This field will only be available if
IP Mode
is set to
STATIC IP
. The default IP address is
192.168.1.254
.
Netmask
Enter the subnet mask in this field. This field will only be available if
IP Mode
is set to
STATIC IP
.
Gateway
Enter the gateway (router) address in this field. This field will only be available if
IP Mode
is set to
STATIC IP
.
Telnet Port
Enter the Telnet listening port in this field.
Telnet Login Mode
Click this toggle to set the login mode to either
ON
or
OFF
. If this feature is set to
ON
, then the AT-OME-TX21-WP-E
will prompt for both the username and password at the start of a Telnet session. Use the same credentials as the
web GUI.
Telnet Timeout
Click this drop-down list to select the timeout interval, in seconds, before the Telnet connection is automatically
closed after no activity. Range: 1 to 3600 (seconds).
Broadcast
By default, broadcast mode is set to
ON
. When set to
ON
, feedback will be broadcasted to the web GUI and control
system (if connected), via TCP/IP. To disable broadcasted feedback, set this feature to
OFF
. Command queries
such as
IPCFG
and
Type
will only return information to the requester.
Network
