AT-OME-TX21-WP-E
17
Installation
To reset the AT-OME-TX21-WP-E to factory-default settings, either one of the following methods may be used:
• Remove the wallplate, then press and hold the
RESET
button.
• Execute the
Mreset
command using RS-232 or Telnet. Refer to the
AT-OME-TX21-WP-E API
for more
information.
1. Remove the faceplate from the AT-OME-TX21-WP-E.
2. Press and hold the
RESET
button for approximately 10 seconds. While this button is depressed, the RESET LED
indicator will glow solid green.
3. Release the
RESET
button once the RESET LED indicator begins to flash.
During the reboot process, the
PWR
LED indicator will glow red. The unit will be operational when the
PWR
LED
indicator glows blue.
4. Reattach the faceplate to the front of the AT-OME-TX21-WP-E.
Resetting to Factory-Defaults
RESET
FW
TEST
IP
RESET LED indicator
Using the Front Panel
